铁路信号领域安全计算机的应用及发展

李夏; 丁欢; 任喜国; 王巨汉; 曹源

铁路信号领域安全计算机的应用及发展

1. 北京全路通信信号研究设计院集团有限公司, 北京 100070;
2. 北京交通大学电子信息工程学院, 北京 100044;
3. 北京交通大学轨道交通运行控制系统国家工程研究中心, 北京 100044

基金项目:

国家自然科学基金高铁联合基金资助项目(U1734201)

详细信息

作者简介:
李夏,高级工程师;丁欢,高级工程师。

中图分类号: U284;TP39
计量
- 文章访问数: 78
- HTML全文浏览量: 11
- PDF下载量: 23
出版历程
- 收稿日期: 2019-05-29

Application and development of safety computer in railway signal field

1. CRSC Research & Design Institute Group Co. Ltd., Beijing 100070, China;
2. School of Electronic and Information Engineering, Beijing Jiaotong University, Beijing 100044, China;
3. National Engineering Research Center of Rail Traffic Control System, Beijing Jiaotong University, Beijing 100044, China

摘要

摘要: 介绍铁路领域安全计算机的相关标准及安全计算机平台通用架构,以铁路信号领域安全计算机的应用为主题,总结安全计算机在计算机联锁、无线闭塞中心、车载系统的应用情况,研究安全计算机的应用现状和研究热点。研究表明,铁路信号领域安全计算机的研究热点主要集中在表决与同步的设计与实现、安全通信设计、安全评估算法、利用商用现成品和技术(COTS)部件和现场可编程门阵列(FPGA)实现安全需求等方面。
- 安全计算机 /
- 表决与同步 /
- 安全通信 /
- 安全性评估
Abstract: This article introduced the relevant standards and platform general architecture of safety computer in railway field. Taking the application of safety computer in railway signal field as the theme, it summarized the application of safety computer in computer interlocking, on-board system and wireless block center, and studied the application status and research hotspots of safety computer.The research shows that the research focus of safety computer in railway signal field mainly focuses on the design and implementation of voting and synchronization, the design of safety communication, the calculation of safety evaluation, and the implementation of safety requirements by using Commercial Off-The -Shelf (COTS) components and Field Programmable Gate Array (FPGA).
- safety computer /
- voting and synchronization /
- safety communication /
- safety evaluation

HTML全文

参考文献(22)

[1]	赵宏军. 安全计算机技术在LKJ-15型列车运行监控系统中的应用研究[J]. 上海铁道科技, 2017(4):78-80.
[2]	刘真. 一种三取二安全计算机系统的设计与实现[J]. 铁路计算机应用, 2016, 25(11):49-52.
[3]	Liang X, Wan Y. Key factors of safety analysis for application software in vital computers[C]//5th International Conference on Consumer Electronics, 2015.
[4]	Andalam S, Roop P S, Girault A, et al. A Predictable Framework for Safety-Critical Embedded Systems[J].IEEE Transactions on Computers, 2014, 63(7):1600-1612.
[5]	Chen X, Zhou G, Yang Y, et al. A Newly Developed SafetyCritical Computer System for China Metro[J].IEEE Transactions on Intelligent Transportation Systems, 2013, 14(2):709-719.
[6]	Chebila M, InnalF. Generalized analytical expressions for safety instrumented systems" performance measures:PFDavg and PFH[J]. Journal of Loss Prevention in the Process Industries, 2015(34):167-176.
[7]	Innal F, Lundteigen M A, Liu Y, et al. PFDavg generalized formulas for SIS subject to partial and full periodic tests based on multi-phase Markov models[J]. Reliability Engineering & System Safety, 2016(150):160-170.
[8]	Azizpour H, Lundteigen M A,Yiliu L. Analysis of Simplification in Markov Based Approach for Performance Assessment of Safety Instrumented System(SIS)[J]. Reliability Engineering & System Safety, 2019(183):256-260.
[9]	Belland J R, Wiseman D. Using fault trees to analyze safetyinstrumented systems[C]//Reliability & Maintainability Symposium, 2016.
[10]	Miao Z, Niu R, Tang T, et al. A new generation algorithm of fault tree minimal cut sets and its application in CBTC system[C]//2013 IEEE International Conference on Intelligent Rail Transportation Proceedings, 2013.
[11]	邹力棒. 安全计算机研究与应用[D]. 南昌:华东交通大学, 2017.
[12]	彭奇. 基于FFFIS编码策略和FPGA的应答器报文信号源设计[D]. 成都:电子科技大学, 2013.
[13]	PaulitschM, Steiner W. Fault-tolerant clock synchronization for embedded distributed multi-cluster systems[C]//Euromicro Conference on Real-time Systems, 2003.
[14]	陈光武. 轨道交通安全计算机系统及安全控制机制关键技术研究[D]. 兰州:兰州交通大学, 2014.
[15]	Belland J R, Wiseman D. Using fault trees to analyze safetyinstrumented systems[C]//Reliability & Maintainability Symposium, 2016.
[16]	Miao Z, Niu R, Tang T, et al. A new generation algorithm of fault tree minimal cut sets and its application in CBTC system[C]//2013 IEEE International Conference on Intelligent Rail Transportation Proceedings, 2013.
[17]	周喜强. 基于贝叶斯网络的列控中心安全分析[D]. 成都:西南交通大学, 2015.
[18]	Bai T, Chen W H, et al. Software hazard analysis for nuclear digital protection system byColored Petri Net[J]. Annals of Nuclear Energy, 2017(110):486-491.
[19]	Chung E, Hanks J S. Fault tree analyses as a tool for flight control system architecture design[C]//Reliability & Maintainability Symposium, 2016.
[20]	王元鹏. CTCS-3列控系统降级场景建模与仿真[D]. 兰州:兰州交通大学, 2015.
[21]	储依帆. 铁路信号安全型继电器的可靠性评估方法研究[D]. 北京:北京交通大学, 2018.
[22]	黄冬梅. COTS部件在列控安全计算机中应用的研究[D]. 北京:北京交通大学, 2017.

施引文献(9)

期刊类型引用(4)

1.	张昊凡，邢东峰，石建强，杨扬，陈光武. 基于FlexRay总线的车载安全驱动采集板设计. 仪表技术与传感器. 2024(01): 52-56+69 . 百度学术
2.	宿秀元. 城市轨道交通列车运行控制系统发展方向探讨. 铁道通信信号. 2021(02): 66-70 . 百度学术
3.	孙俊勇，罗显光，许晋荣，曾军，石建强. 基于FlexRay总线的分布式车载安全计算机系统设计. 铁路计算机应用. 2021(10): 54-58 . 本站查看
4.	粟昆，王奇，代飞. 轨道交通安全计算机平台通用维护模块设计. 控制与信息技术. 2021(06): 107-111 . 百度学术