铁路客车设备安装梁强度分析

基金项目: 国家科技支撑计划项目（2015BAG12B01）。

详细信息

Strength analysis of Equipment installation beam for railway passenger cars

1.
CSR Qingdao Sifang Locomotive & Rolling Stock Co., Ltd., Qingdao 266111, China;
2.
School of Electronic and Information Engineering, Beijing Jiaotong University, Beijing 100044, China

摘要: 铁路客车车下设备安装梁是车下重要承载结构，对其强度有严格的要求。本文首先建立了设备安装梁的有限元模型，计算设备舱总体应力分布以评定其结构静强度。之后利用Goodman疲劳曲线图对设备舱疲劳强度进行了分析和计算。结果表明，在三向冲击载荷及动载荷下，设备舱结构的静强度及疲劳强度满足设计运用要求，达到了验证其结构安全性的目的。
- 设备舱 /
- 铁路客车 /
- 有限元 /
- 静强度 /
- 疲劳强度
Abstract: Passenger train’s equipment installation beam of railway passenger cars is an important bearing structure under the cars, so there are strict requirements on its strength. This article built up the finite element model of the equipment installation beam, calculated the overall stress distribution of equipment compartment to assess its structure static strength, used Goodman fatigue curve to analyze and calculate the fatigue strength of equipment compartment. Results showed that the static strength and fatigue strength of the equipment compartment structure could meet the design requirements under three-dimensional impact load and dynamic load, reached the purpose of verifying the structure safety.
- equipment compartment /
- railway passenger cars /
- finite element /
- static strength /
- fatigue strength

[1]	赵少汴，王中保 . 抗疲劳设计—方法与数据 [M]. 北京：机械工业出版社，1997.
[2]	EN12663-2010 Railway application-Structure requirement of railway vehicle bodies[S]. Brussels: Comite Europeen de Normalisation, 2010.
[3]	赵永翔，杨冰，彭佳纯，等 . 铁道车辆疲劳可靠性设计 Goodman-Smith 图的绘制与应用 [J]. 中国铁道科学，2005， 25（6）：6-12.
[4]	陈雷，章梓茂 . B 级车轮铸钢的疲劳可靠性设计 GoodmanSmith 图 [J]. 西南交通大学学报，2006，41(6) ：705-708.
[5]	Jack A Collins. Failure of Materials in Mechanical Design: Analysis Prediction, Prevention [M].New York: A WileyInterscience Publication, John Wiley & Sons，1993.
[6]	项彬，史建平，郭良彦，等 . 铁路常用材料 Goodman 疲劳极限线图的绘制与应用 [J]. 中国铁道科学，2002，23（4）： 72-76.