牵引供电系统计算软件的开发和应用

详细信息

Calculation software on Traction Power Supply System

摘要: 本文研究开发的牵引供电系统计算软件以VC++为设计平台,采用ActiveX Automation技术对AutoCAD进行二次开发,以实现VC++界面对AutoCAD的绘图控制,可以计算各种线路条件、各种牵引变压器接线形式、各种牵引网供电方式以及各种牵引供电方案的主要技术指标,将VC++丰富的人机界面、高效的执行效率、强大的底层交换数据能力和AutoCAD强大的绘图功能有机结合起来,提高了工程设计的效率和质量。
- 牵引供电 /
- VC++ /
- ActiveX Automation /
- AutoCAD
Abstract: The research and development of calculate software on Traction Power Supply System were based on VC + + platform, which was adopted ActiveX Automation technology for secondary development of AutoCAD, to make the VC++ interface for AutoCAD drawing control, calculate all kinds of lines, all kinds of traction transformer connection form, all kinds of traction network power supply mode and various technical indicators calculation of the traction power supply scheme. Combined with abundant interface, efficient execution efficiency, strong ability of the underlying data exchange and combine the AutoCAD powerful graphics functions, the efficiency and quality of engineering design were improved.
- Traction Power Supply System /
- VC++ /
- ActiveX automation /
- AutoCAD

[1]	曹建猷. 电气化铁道供电系统[M]. 北京：中国铁道出版社,1987.
[2]	李群湛, 贺建闽. 牵引供电系统分析[M]. 成都：西南交通大学出版社,2007.
[3]	楚振宇.基于ActiveX Automation的铁路工程计算机辅助设计一体化 [J] .铁道学报,2000（2）：114-117.
[4]	铁道部电气化工程局电气化勘测设计院.电气化铁道设计手册–牵引供电系统[S].北京：中国铁道出版社,1988.
[5]	李良威,邓云川,林宗良. 牵引供电系统继电保护整定计算软件的开发[J] . 铁路计算机应用,2012（9）：18-20.